Step 2.
Insert the evaluation board (STEVAL-OET005C or STEVAL-OET005D) between a USB Type-C™ host
and a USB Type-C™ device.
For instance, connect the evaluation board between a USB Type-C™ key and a personal computer to
show the ESD protection transparency.
Figure 3.
Connecting the evaluation board
Step 3.
Plug the testing board in place of a USB Type-C™ device to perform the ESD test on the equipment
with a TVS inserted between ESD shoots and equipment.
Figure 4.
Connecting the evaluation board
UM2991
How to use the kit
UM2991
-
Rev 2
page 3/16
