STPM01 kit components
UM0509
8/21
2.10
Description of push-buttons and default value
2.11
Description of connectors
Figure 3.
STPM01 programmer kit: placement of connectors
Table 3.
Push-buttons (refer to
)
Jumper
Description
Default
SW1
Wakeup:
– When pushed, wakes up microcontroller
SW2
Application default:
– When pushed, forces default conditions
SW3
Reset button:
– When pushed, forces microcontroller reset
Fitted
Table 4.
Connectors (refer to
)
Connector
Description
P1
Opto - isolated RS232 female connector
J4
DC-IN 5 V connector
CN2
DC-IN 5 V connector
CN1
JTAG connector
J7
SPI connector
P1
J4
CN2
CN1
J7
www.BDTIC.com/ST
