ST STEVAL-IME015V1, User Manual, Page: 10 / 25

5 Connectors
5.1 Power supply connector
The STEVAL-IME015V1 is powered through connector CN10.
Figure 8. Power supply connector CN10
The suggested power up sequence to minimize the risk of damage to user devices attached to STEVAL-
IME015V1 is the following:
1.
VDDP
2. VPP or VNN
3. VNN or VPP
Table 6. Power supply connector pinout
PIN Number Pin name (STHV64SW)
1 GND
2 VDDP
3 VNN
4 RGND
5 VPP
5.2 Digital interface connector
The STHV64SW signals are on the upper side of the digital interface connector (CN9), and common ground pins
are on the lower side.
Figure 9. Digital interface connector CN9
The following table shows pinout for the STHV64SW signals on connector CN9. All the other pins of the
connector are connected to ground.
UM2482
Connectors
UM2482 - Rev 1
page 10/25