background image

Introduction

The 

STEVAL-IFP043V1

 is an industrial digital output expansion board. It provides a powerful and flexible environment for the

evaluation of the driving and diagnostic capabilities of the 

IPS2050HQ

 (dual high-side smart power solid state relay) in a digital

output module connected to 2.5 A (max.) industrial loads.
The 

STEVAL-IFP043V1

 can interface with the microcontroller on the 

STM32 Nucleo

 via 5 kV optocouplers driven by GPIO pins,

Arduino UNO R3 (default configuration) and ST morpho (optional, not mounted) connectors.
The expansion board can be connected to either a 

NUCLEO-F401RE

 or 

NUCLEO-G431RB

 development board.

It is also possible to evaluate a system composed by up to four stacked 

STEVAL-IFP043V1

 expansion boards.

As an example, a system with four 

STEVAL-IFP043V1

 expansion boards allows you to evaluate an eight-channel digital output

module with 2.5 A (max.) capability each.

Figure 1. 

STEVAL-IFP043V1 expansion board

Getting started with the STEVAL-IFP043V1 industrial digital output expansion 

board

UM3049

User manual

UM3049

 - 

Rev 1

 - 

August

 2022

For further information contact your local STMicroelectronics sales office.

www.st.com

Summary of Contents for STEVAL-IFP043V1


















Reviews: