4
Software demonstration applications
•
In order to develop a software application for the STEVAL-IDB007Vx, STEVAL-IDB008Vx or STEVAL-
IDB009Vx evaluation board, it is recommended to start with the reference demonstration applications
provided within the BlueNRG-1_2 DK SW package for
, BlueNRG-2 BLE stack v2.x family
) available on the STEVAL-IDB007Vx, STEVAL-IDB008Vx, STEVAL-IDB009Vx web
pages.
•
Unzip the file, launch the related installer and follow installation steps.
•
Wait for the package installation to complete.
•
The Projects folder in DK SW package contains the available demonstration applications, IAR projects,
sources and header files.
•
IAR Embedded Workbench for ARM (EWARM) tool is needed for building and downloading software
applications running on the BlueNRG-1, BlueNRG-2 microcontrollers.
Note:
For a description of the available BlueNRG-1, BlueNRG-2 demonstration applications and supported platforms,
refer to BlueNRG-1, BlueNRG-2 development kits user manual available on the related web page. The
BLE_SensorDemo.hex prebuilt binary images for BlueNRG-1, BlueNRG-2 platforms are also provided within
the DK software package, in the Firmware folder.
Keil MDK-ARM and WiSE-Studio for ARM (GCC) toolchains projects are also available.
UM2094
Software demonstration applications
UM2094
-
Rev 7
page 8/14
