ST STEVAL-BLUEPIRV1, User Manual, Page: 4 / 17

2.3 STBLESensor application
The STBLESensor application shows the data exported by a Bluetooth
®
Low Energy device using the BlueST
protocol.
The app shows various panels with the application data. It is available at Google Play and App Store.
Figure 5. STBLESensor app QR codes
When the device scanning is performed with the STEVAL-BLUEPIRV1 active in the smartphone range, the board
should appear in the list as BluePIR.
Figure 6. Device list
By clicking on BluePIR, the smartphone connects to the STEVAL-BLUEPIRV1 . The user interface with board
information then appears.
There are two panels available when successfully connected to
STEVAL-BLUEPIRV1 .
UM3001
STBLESensor application
UM3001 - Rev 1
page 4/17