![ST ST7260E2 User Manual Download Page 10](http://html1.mh-extra.com/html/st/st7260e2/st7260e2_user-manual_1355962010.webp)
Running the evaluation board
UM0497
10/21
Figure 9.
USB Li-Ion evaluation board HID
This ensures that the evaluation board is connected properly to the USB and now ready to
be used. Now we can proceed to the next steps.
2.2
Connecting the Li-Ion battery
The evaluation board is not provided with any specific slot in order to avoid making it
package specific. Instead a 3-pin connector is provided on the evaluation board as shown in
.
Figure 10.
Li-Ion battery 3-pin connector
You can either solder
a particular slot to this connector and then connect the battery in that
slot, or if you are directly connecting the battery to the connector, please ensure that the
battery is properly connected as improper connection may affect the accuracy of the analog
measurement
,
thus affecting the overall accuracy of the charging.