ST SPC58NHADPT386S, User Manual

Page: 12 / 36

5.6 Configuration for pin shared between eMMC & SD-card reader
The following jumpers need to configure the pin shared between eMMC & SD-CARD READER set the jumpers
described in the table below.
Table 6. Pin shared between eMMC & SD card reader Jumper
Jumper Description Default Position
J32
PQ4 configuration
•
1-2 PQ4_S (SD-CARD)
• 2-3 PQ4_E (eMMC)
1-2
(SD-CARD)
Figure 9. Overview of SPC58NHADPT386S Rev. C "mini module" -
top - D3
J33
PQ5 configuration
•
1-2 PQ5_S (SD-CARD)
• 2-3 PQ5_E (eMMC)
1-2
(SD-CARD)
Figure 9. Overview of SPC58NHADPT386S Rev. C "mini module" -
top - D3
J34
PQ6 configuration
•
1-2 PQ6_S (SD-CARD)
• 2-3 PQ6_E (eMMC)
1-2
(SD-CARD)
Figure 9. Overview of SPC58NHADPT386S Rev. C "mini module" -
top - C3
J35
PQ7 configuration
•
1-2 PQ7_S (SD-CARD)
• 2-3 PQ7_E (eMMC)
1-2
(SD-CARD)
Figure 9. Overview of SPC58NHADPT386S Rev. C "mini module" -
top - C3
J36
PS6 configuration
•
1-2 PS6_S (SD-CARD)
• 2-3 PS6_E (eMMC)
1-2
(SD-CARD)
Figure 9. Overview of SPC58NHADPT386S Rev. C "mini module" -
top - C3
J37
PP15 configuration
•
1-2 PP15_S (SD-CARD)
• 2-3 PP15_E (eMMC)
1-2
(SD-CARD)
Figure 9. Overview of SPC58NHADPT386S Rev. C "mini module" -
top - D3
J38
PQ0 configuration
•
1-2 PQ0_S (SD-CARD)
• 2-3 PQ0_E (eMMC)
1-2
(SD-CARD)
Figure 9. Overview of SPC58NHADPT386S Rev. C "mini module" -
top - C3
UM2789
Configuration for pin shared between eMMC & SD-card reader
UM2789 - Rev 1
page 12/36