ST MB1442, User Manual

Page: 7 / 25

6 Hardware layout and configuration
The STM8 Nucleo-32 board is designed around an STM8S Series microcontroller in an LQFP32 package.
Figure 3 shows the connections between the STM8 and its peripherals (ST-LINK/V2-1, push-button, LED, and
ARDUINO
®
Nano V3 expansion connector).
Figure 4 and Figure 5 show the location of these features on the STM8 Nucleo-32 board.
The mechanical dimensions of the board are shown in Figure 6 .
Figure 3. Hardware block diagram
Embedded
ST-LINK/V2-1
STM8
Microcontroller
RESET
Micro
USB
IO
IO
B1
RST
ARDUINO
®
Nano
connector
LED
LD3
ARDUINO
®
Nano
connector
UM2391
Hardware layout and configuration
UM2391 - Rev 1
page 7/25