ST G3-PLC, User Manual, Page: 32 / 52

ADP menu UM1811
32/52 DocID026814 Rev 1
7.2 ADPM control menu
The ADP layer management entity control menu offers the management layer commands of
the G3-PLC ADP layer, as shown in
Figure 20 .
Figure 20. ADPM control menu
This menu allows the user to execute the following commands:

ADPM-DISCOVER.Request: perform
s
a discovery procedure for the duration entered
by the user in the free text area.

ADPM-NETWORK-START.Request: start
s
a new powerline area network on the server
side with the specified PANId.

ADPM-NETWORK-JOIN.Request: this primitive allows the next upper layer to join
a network identified by PANId through a low bootstrap agent (short address).

ADPM-NETWORK-LEAVE.Request: this primitive allows the next upper layer to leave
an existing network.

ADPM-RESET.Request: it resets the ADP layer.

ADPM-ROUTE-DISCOVERY.Request: request
s
the discovery of the route towards
a destination. The user needs to enter the destination address to look for and the
maximum allowed number of hops.

ADPD-PATH-DISCOVERY.Request: request
s
the discovery of the path towards
a destination. The user needs to enter the destination address to look for and the
metric type for the link cost evaluation.