DocID026814 Rev 1
13/52
UM1811
G3LIB menu
52
4 G3LIB
menu
4.1 G3LIB
root
menu
The G3LIB root menu allows to configure the G3-PLC library implementation and to get
access to features not specified by the G3 protocol.
Figure 7. G3LIB root panel
The G3LIB main menu contains two areas. The first one (1) comprises the commands
useful to configure the host interface application:
HI-MODE-SET.Request: this command sets the G3-PLC platform working mode.
HI-MODE-GET.Request: this command gets the operational mode of the host interface
application.
HI-STATE-GET.Request: this command performs a basic action to test the connection
with the board.
HI-HWRESET.Request: this command performs a system reset of the device.
The second area includes (2) all the commands related to the G3 library configuration. The
following commands are available:
G3LIB-TESTMODE.Request: this command enables or disables a specific test mode
used for G3-PLC library verification, which normally is not useful for the user.
G3LIB-GET.Request: this command is used to get the value of one attribute of the G3-
PLC ST library.
G3LIB-SET.Request: this command is used to set the value of one attribute of the G3-
PLC ST library.
