ADP menu
UM1811
36/52
DocID026814 Rev 1
adpBroadcastLogTable Contains the broadcast log table
adpRoutingTable Contains the routing table
adpUnicastRREQGenEnable
If TRUE, the RREQ shall be generated with its ''unicast RREQ'' flag set to '1'
If FALSE, the RREQ shall be generated with its ''unicast RREQ'' flag set to '0'
adpGroupTable Contains the group addresses to which the device belongs
adpMaxHops Defines the maximum number of hops to be used by the routing algorithm
adpDeviceType
Defines the type of the device connected to the modem:
0: PAN device
1: PAN coordinator
2: not defined
adpNetTraversalTime
Maximum time that a packet is expected to take to reach any node from any
node in seconds
adpRoutingTableEntryTTL Maximum time to live of a routing table entry (in seconds)
adpKr A weight factor for the robust mode to calculate the link cost
adpKm A weight factor for modulation to calculate the link cost
adpKc A weight factor for the number of active tones to calculate the link cost
adpKq A weight factor for LQI to calculate the route cost
adpKh A weight factor for hop to calculate the link cost
adpRREQRetries The number of RREQ retransmission in case of RREP reception timeout
adpRREQRERRWait Time in seconds to wait between two consecutive RREQ or RRER generations
adpWeakLQIValue
The weak link value defines the LQI value below which a link to a neighbor is
considered as a weak link. A value of 52 represents an SNR of 3 dB.
adpKrt
A weight factor for the number of active routes in the routing table to calculate
the link cost
adpSoftVersion The software version
adpSnifferMode The Sniffer mode activation/deactivation
adpBlacklistTable Contains the list of the blacklisted neighbors
adpBlacklistTableEntryTTL Maximum time to live of a blacklisted neighbor entry (in minutes)
adpMaxJoinWaitTime Network join timeout in seconds for LBD
adpPathDiscoveryTime Timeout for path discovery in seconds
adpActiveKeyIndex Index of the active GMK to be used for data transmission
adpDisableDefaultRouting
If TRUE, the default routing (LOADng) is disabled. If FALSE, the default routing
(LOADng) is enabled
Table 8. ADP G.9903 information base attributes52 (continued)
Standard G.9903 ADP information base attributes
