DocID017768 Rev 4
31/39
UM0979
Supported commands
39
4.2.8
Digital output humidity sensor: supported commands
Table 11
below lists the commands supported by the devices/demonstration boards
including a digital output humidity sensor:
*ver
Firmware version
e.g.: V1.0
*prAA
Pressure sensor register read
e.g.: PRAAhDDh
*pwAADD
Pressure sensor register write
*single
It gets a single X, Y, and Z data acquisition
(see
Table 5
)
*list
Prints the list of MKIs supported
e.g.: MKI105V1
*listdev
Prints the list of devices supported
e.g.: LIS3DH
*echoon
Activates the write verbose mode
e.g.: PRAAhDDh
*echooff
Deactivates the write verbose mode
*pfiforst
(1)
Pressure sensor “Reset mode” enable
st 0 0 0 0 0 0 IR FC FS
*pfifomde
(1)
Pressure sensor “FIFO mode” enable
st 0 0 0 0 0 0 IR FC FS
*pfifostr
(1)
Pressure sensor “FIFO stream” enable
st 0 0 0 0 0 0 IR FC FS
*pfifostf
(1)
Pressure sensor “Stream to FIFO” enable
st 0 0 0 0 0 0 IR FC FS
*pfifobtf
(1)
Pressure sensor “Bypass to FIFO” enable
st 0 0 0 0 0 0 IR FC FS
*pfifobts
(1)
Pressure sensor “Bypass to stream” enable
st 0 0 0 0 0 0 IR FC FS
*pfifodstr
(1)
Pressure sensor “Dynamic stream” enable
st 0 0 0 0 0 0 IR FC FS
1. Available only for devices with embedded FIFO.
Table 11. Digital output pressure sensor: supported commands list (continued)
Command
Description
Returned value
Table 12. Digital output humidity sensor: supported commands list
Command
Description
Returned value
*setdbXXXVY
Selects firmware according to the adapter
connected
*start
Starts continuous data acquisition
(see
Table 4
)
*debug
Returns the output data in readable text
format
(see
Table 5
)
*stop
Stops data acquisition
*Zon
Forces 3-state
*Zoff
Exits from 3-state
*dev
Device name
e.g.: LIS3DH
*ver
Firmware version
e.g.: V1.0
*hrAA
Humidity sensor register read
e.g.: HRAAhDDh
*hwAADD
Humidity sensor register write
*single
It gets a single X, Y, and Z data acquisition
(see
Table 5
)
