Pressure sensor FIFO mode enable
The *pfifomde command is used to enable the pressure sensor FIFO mode.
Pressure sensor FIFO Stream mode enable
The *pfifostr command is used to enable the pressure sensor FIFO stream mode.
Pressure sensor Stream-to-FIFO mode enable
The *pfifostf command enables the pressure sensor Stream-to-FIFO mode.
Pressure sensor Bypass-to-FIFO mode enable
The *pfifobtf command is used to enable the pressure sensor Bypass-to-FIFO mode.
Pressure sensor Bypass-to-Stream mode enable
The *pfifobts command is used to enable the pressure sensor Bypass-to-Stream mode.
Pressure sensor Dynamic Stream mode enable
The *pfifodstr command enables the pressure sensor Dynamic Stream mode.
PDON and PDOFF
The *PDON and *PDOFF commands are employed respectively to set to 1, and to clear to 0, the “power-down”
pin in analog devices.
STON and STOFF
The *STON and *STOFF commands are employed respectively to set to 1, and to clear to 0, the “self test” pin in
analog devices.
HPON and HPOFF
The *HPON and *HPOFF commands are employed respectively to set to 1, and to clear to 0, the “high-pass filter”
pin in analog devices.
FSON and FSOFF
The *FSON and *FSOFF commands are employed respectively to set to 1 and to clear to 0 the “full scale” pin in
analog devices.
UM0979
Supported commands
UM0979
-
Rev 6
page 22/39
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
