Disconnect the instrument from the measuring circuit before opening battery
cover to replace the batteries.
Replacing the battery
Place the clamp meter on its face. Loosen the screw of battery cover Which
is at rear bottom side of meter. Remove battery cover by Sliding it to bottom
side.
Remove the battery from the battery compartment and carefully disconnect
battery connectors.
Snap the battery connectors to a new 9 V battery and insert the battery in to
the battery compartment.
Replace the battery cover by fitting it in to slots on battery compartment.
Tighten the battery cover with the screw.
Please destroy the batteries in an environment friendly way.
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Attention!
18.2. Periodic
The clamp
between opening jaws should be cleaned with dry cloth before operating. Avoid
use of cleansers, abrasives or solvents.
19. Servicing
When you need service, refer the cover page for company address.
Check-up:
meter does not require any specific maintenance. The surface
22