Introduction
The
evaluation board hosts a 2.8” LCD display with resistive touch for a graphical user interface (GUI)
which interacts with SPC58 MCU discovery boards. It aims at providing, in the prototyping phase, a simple and fast tool to
display information or simple menus in automotive applications.
A new trend in modern vehicles calls for several auxiliary displays to complement the main infotainment system. The additional
displays are employed for status feedback reporting, for extended infotainment features like in rear-seats and for basic control to
replace standard buttons and levers like in seat adjustment, mirror positioning or headlight height adjustment.
Figure 1.
Extended infotainment system
The board can be easily evaluated thanks to a common platform consisting of
peripherals used and provides automatic code generation capability exploiting a template-based engine.
The
has a 240x320 pixels LCD resolution and interfaces with an ILI9341 IC driver, managing the display,
and a TSC2046, managing the touch feedback, via SPI communication (4 wires).
Getting started with the AEK-LCD-DT028V1 display expansion board with
resistive touch for Chorus family
UM2939
User manual
UM2939
-
Rev 1
-
September 2021
For further information contact your local STMicroelectronics sales office.
www.st.com
