ST WELD MINI-160, Instruction Manual

Page: 39 / 45

INVERTER WELDING MACHINE
INTENDED USE
The welding machine is used for welding stainless, alloy, carbon steel, copper and other non-ferrous metals.
The welder can be used at high altitudes, outdoors and indoors.
Use the device only for its intended purpose. Any other use is considered a case of misuse. The user / operator
and not the manufacturer will be responsible for any damage or injury caused by this misuse. Please note
that this device has not been designed for commercial or industrial use. The warranty will not be valid if the
equipment is used for commercial, industrial or similar purposes.
TECHNICAL PARAMETERS
MODEL MINI-160
VOLTAGE / FREQUENCY 230 V / 50 Hz
RATED INPUT CAPACITY 7,2 kVA
CURRENT RANGE
30 A / 21,2V
160 A / 26,4 V
RATED DUTY CYCLE
40% 160 A / 26,4 V
100% 101 A / 24 V
NO-LOAD VOLTAGE 67 V
DUTY CYCLE 40 %
EFFICIENCY 80 %
POWER FACTOR 0,73
INSULATION CLASS F
PROTECTION CLASS IP21S
ELECTRODE 2,5 -4,0 mm
DIMENSIONS 310 x 195 x 230 mm
WEIGHT 4 kg
PRODUCT PARTS
FRONT PANEL DESCRIPTION BACK PANEL DESCRIPTION
1 O.C
1 Input cable and
infix reed
2 Power 2 Power switch
3 Potentiator
4 Output end - negative
pole
5 Output end - positive
pole
6 Digital screen
Accessories: welding spare glass, hammer / brush, earth cable, MMA cable