6
7
Sound Controls
(continued)
Balance Control: (continued)
3. Press the VOL buttons to adjust the
output of the left and right speakers. The
balance setting will appear in the display.
L--r = Equal sound left and right
r 7 = Right speakers only
L 7 = Left speakers only
After 5 seconds control reverts back to
volume control.
TRACK
MODE
VOL
Left
Speaker
Right
Speaker
Fader Control:
1. Press and hold the MODE button until “bA 0”
appears in the display.
2. Press the MODE button three more times and
“F=r” will appear in the display.
3. Press the VOL buttons to adjust the
output of the front and rear speakers. The
fader setting will appear in the display.
F--r = Equal sound front and rear
r 7 = Rear speakers only
F 7 = Front speakers only
After 5 seconds control reverts back to vol-
ume control.
TRACK
MODE
VOL
Fader
Level
Hold
TRACK
MODE
VOL
Front
Speakers
Rear
Speaker
iPod, iTouch or iPhone Operations
iPod, iTouch or iPhone Operation:
1. Plug your iPod, iTouch or iPhone into the
30-pin connector.
Warning: DO NOT plug in the 3.5mm jack
when the 30-pin connector is plugged in.
2. Secure the iPod with the mounting straps.
3. Close the weatherproof door.
4. Turn on the WP-ID5 by pressing the button.
5. Press the MODE button until “IPOd” appears
in the display. The iPod will automatically
start playing.
6. Press the TRACK buttons to select the
desired track.
Note 1: Press
to pause the track, press
again to resume playing the track.
Note 2: If using a newer iPod or iPhone with
“Shake to Shuffle” you will need to go into set-
tings and turn this function “Off”.
Note 3: You may receive the “this accessory
is not made to work with iPhone” message
just press “NO” and the device will function
normally.
Auxiliary Input Operations
3.5mm Audio Input Operation:
1. Plug the 3.5mm jack into your phone or MP3
player.
2. On your device select the desired track, press
play and set the volume between 80-90%.
3. Secure the device with the mounting straps.
4. Close the weatherproof door.
5. Turn on the WP-ID5BTD by pressing the
button.
6. Press the MODE button until “AU In” appears
in the display. The audio from your device
can now be heard thru the speakers.
Note: The WP-ID5BTD does not control the
device, it simply allows the audio to be played
through the system.
TRACK
MODE
VOL
30-Pin
Connector
TRACK
MODE
VOL
3.5mm
Jack