16
E. Drill a pilot hole at the places just marked with a 1/8” drill bit. Then follow up by using a 1/4” drill bit for both pilot holes (for mounting the pod).
E2
E1
G
F. Route the speaker cable attached to the pod through the inside footwell 1/2”
hole. Position the speaker pod in place and line up with drilled mounting holes
H. Connect the B-H1149 cable to the speaker pods and zip tie all
cables to the frame
I. Connect the speaker harness to the amplifi er
G. With the provided M6 screws and washers, loosely mount the pod through the 3 holes previously drilled. Once all screws have been
insterted into the pod, hand tighten all 3 screws.
F
G
H
I