SSV Works F3-2A Manual Download Page 6

User Guide

MRB3

Bluetooth

®

 Media Controller

Corporate: SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030

Web: www.SSVworks.com     |     Phone: 818-991-1778     |     Fax: 866-293-6751

The Bluetooth

®

 word mark and logos are registered trademarks owned by Bluetooth SIG,Inc. and any use of such 

marks by SSV Works is under license.       © 2016 SSV Works, Oxnard, CA 93030         MRB3     Rev. B     3-22-16

Do not attempt to disassemble or repair the MRB3 yourself. Please call SSV Works for 

technical assistance or repair information. Changes or modifications to the MRB3 not 

authorized by SSV Works will void the warranty.

SSV Works recommends disconnecting the negative battery terminal before 

beginning any installation.

SAFETY INFORMATION

!

RADIO FUNCTIONS

CONNECTING AN EXTERNAL AUDIO DEVICE 

(OPTIONAL)

BLUETOOTH AUDIO STREAMING

MRB3

WARRANTY INFORMATION:

All SSV Works enclosures are covered by a limited lifetime warranty against defects in material or workmanship.  All 

SSV Works Electronics are covered by a limited 1 year warranty against defects in material or workmanship.  Labor for 

replacement of defective components is not covered.  All SSV Works Speakers are covered by a limited 1 year warranty 

against defects in material or workmanship.  Contact SSV Works for further warranty information.

Selecting FM/AM Band:  

Press 

MODE

 until the FM or AM band shows on the display. 

Automatic Station Search:  

Press     or     to start automatic station search. The search 

stops when a station is found.

Manual Station Search:  

Press and hold     or     until M - SEEK. Press the     or     

briefly to change the frequency until the desired frequency is set. Change to Automatic 

search (A - SEEK) mode after a station is found.

- Press  

MODE  

until AUX shows on the display.

Add 3.5mm AUX-in 

and USB Charging with 

SSV Works 

3PUSB35A  

(sold separately)

1.  Open the Bluetooth setup program on the mobile device and activate the Bluetooth feature
2.  The device will show up as 

“SSV”

.  Select this device and enter passkey: 

OOOO

3.  After successfully pairing, a Bluetooth logo will appear on the phone menu screen and 

show “CONNECT” “BT MUSIC” on the device LCD display.

Stop Playback:  

Press  

  briefly to pause music.  Press  

  button again to continue playback.

Skip Track:  

Press     or     to play previous/next song.

Line in

Summary of Contents for F3-2A








Reviews: