IGW/400-CAN – CAN Termination
S S V E M B E D D E D S Y S T E M S
12
6 CAN
TERMINATION
It is possible to activate an internal termination resistor for CAN1 and CAN2.
To activate the internal termination resistor for CAN1, just connect pin 9 and pin 10 of
the environment interface with a simple cable bridge as shown in the following figure.
Figure 7: Cable bridge to activate the internal CAN1 termination resistor
To activate the internal termination resistor for CAN2, just connect pin 12 and pin 13 of
the environment interface with a simple cable bridge as shown in the following figure.
Figure 8: Cable bridge to activate the internal CAN2 termination resistor
