Connections
1.
Internconnect inputs
RCA (top) or XLR (bottom) are acceptable input termination types.
2. Input selection switch
Toggle up for RCA (“UNBAL”) input or down for XLR (“BAL”) input.
3. Speaker cable outputs
Spade, banana or bare wire are acceptable termination types. If bi-wiring, connect one pair of speaker
connections to set “A” and another to “B”. For single-wiring, use either set “A” or “B”. Note: “A” and “B” are
connected in parallel so there is no danger of damage for using one or the other, or even a combination of
both, provided you observe the polarity markings.
4. Captive 12 gauge power cord
Do not attempt to remove or replace; doing so will void the warranty.
© Spread Spectrum Technologies. All rights reserved
Ampzilla 2000 Second Edition Manual V1
10
