WWW.SSTCOMM.COM
48
4.4.2 Memory Mapping Area Operation
Memory mapping area divides into input area and output area.
Input mapping address range: 0x0000 ~ 0x3FFF;
Output mapping address range: 0x4000 ~ 0x7FFF.
Each grid represents one byte address.
Green: read command is shown in input mapping area, it will be in green without conflict.
Blue: When address mapping area is located in output area, it will be in blue without conflict.
Red: In input area or output area, different command occupied on the same byte, this byte area will be in red.
For bit operation command, the above grid displaying meaning works the same.
Click input/output area grids, each bit of relevant byte in the grid will show whether each bit is occupied. As is
shown below:
4.5 Hardware Communication
Communication menu is shown as below:
Summary of Contents for GT200-PN-RS
Page 53: ...WWW SSTCOMM COM 53...
