User Manual
Industrial Ethernet Serial Gateway
Modbus Serial/TCP Series
WWW.SSTCOMM.COM
12
3 Instructions of Configuration Software
Double click the configuration software and finish the configuration of Modbus Serial/TCP series gateway.
(GT200-MT-2RS as an example below)
Notes:
The factory setting of Modbus Serial/TCP series gateway is 192.168.0.10, subnet mask is 255.255.255.0, and
gateway address is 192.168.0.1.
(When users click the “Advanced” tab in the “Restore Factory Settings ", the default IP address configuration
is DHCP.)
3.1 Notes before configuration
SST-MT-CFG is a product based on Windows platform, and used to configure parameters of Modbus
Serial/TCP series gateway.
Before running the software, make sure the user’s computer and Modbus Serial/TCP series need to be in the
same network.
Double-click the icon to access the main interface:
