SST Automation GT200-HT-RS, User Manual

Page: 32 / 52

WWW.SSTCOMM.COM 32
4.2.5 Conflict Detection
Conflict detection is used to check the distribution condition of the input and output data of all commands
stored in the memory.
Click icon will show the conflict detection interface as follow:
The left side is configuration commands, the right side is data memory address including receive data storage
address and send data storage. Upper side is memory distribution of the HART’s sending data; lower side is
memory distribution of the HART’s receiving data. When one memory unit is configured with two commands or
more, the memory unit will display red color. When the distributed memory exceeds the defined scale of gateway,
the exceeding part will display yellow color. White color area shows the usable memory. Green color area
indicates occupied memory. Clicking one command, the distribution chart shown in blue will show the storage
location of input/output data.