WWW.SSTCOMM.COM
27
The configured commands are on the left, and the mapping address of input and out put data are on the right.
White color areas are the usable addresses.
Green color areas are occupied addresses.
When one memory address is configured with two commands or more, it will display red.
When the mapping address of a command exceeds the defined range of the GT200-HT-MT, the exceeding part will
display yellow.
Click on a command, the corresponding parts are shown in blue.
5.2.4 Auto Mapping
Automap will automatically distribute the memory addresses according to the input/output bytes number of
configured commands.
Set the correct input/output bytes for each commands, then click
icon and select "yes" in the pop-up menu.
