SM042, Assembly Manual
PCB Version 1.2
Step 17: Finishing the Build
Install the knobs. Some kits contain the D-Shaft sets of potentiometers and knobs.
Others contain the round shaft sets. If you have the round shaft set, you need to per-
form the following procedure. Turn all potentiometers to the position shown on the left
picture, then install each knob, one at a time, keeping it in the correct position. You
may also put the edge of a business card or other object of similar thickness under the
knob to make a little gap between the nut and the knob to prevent them from scraping
each other.
Once you have installed all knobs you are done building the module! Thank you for
purchasing an SSSR Labs product and we wish you to have a lot of fun with your new
module!
Page 18 of 18
