3
English
Network configuration (Customer)
Co
mmissioning date
:
IP
address
:
Subnet mask
:
Default gateway
:
DHCP server activated?
IP pool, start
:
IP
pool, end
:
Serial number
:
MAC address
:
Location
:
Application
Access Gateway for the physical sep-
aration of 2 networks at an Access
server. To operate Access end devices
in different networks, two or more
proprietary networks can be con-
nected to an Access system and still
be kept strictly separate from each
other by using one or more gate-
ways in larger network structures.
Operation of the AGW 671-…
requires the Access server V. 6.0.1
as a minimum requirement. If appli-
cable, a software upgrade/update
must be carried out.
Up to 25 Access end devices as well
as call groups with up to 10 Access
end devices can be operated in
the customer network through the
Access Gateway. Solutions requiring
a higher number of Access end
devices in the customer network are
possible and can be requested from
the Access Service Centre.
General information
Commissioning of the
Access Gateway is described in the
Access Professional commissioning
instructions and is available in the
Siedle download area.
Electrical voltage
Mounting, installation and servicing
work on electrical devices may only
be performed by a suitably qualified
electrician.
Scope of supply
• AGW 671-…
• Power supply unit
• this product information
Mounting
• Connection to the Access network
takes place via the LAN socket
”Access”. The IP address is issued by
DHCP. No other settings are required
here.
• Connection to the customer
network takes place via the LAN
socket ”Customer”. The IP address
is pre-set.
Specifications
Components:
CPU: AMD Geode LX800; 500 MHz
Working memory:
256 MB DDR SDRAM
LAN: 3 x 100 Mbit/s
Operating voltage: 12 V DC
Typical current consumption:
max. 24 W
Ambient temperature:
0 °C to +50 °C
D
imensions (mm) W x H x D:
200 x 200 x 52
Commissioning
• The IP address of the Access server
is required for the complete commis-
sioning of the Access Gateway.
• The laptop and Access Gateway
must be in the same network.
When accessing via the LAN socket
”Customer”, adjust the network
address of the laptop to the IP
address range (192.168.240.x).
Pr
ocedure
1
Connect the laptop to the
LAN socket ”Customer” of the
Access Gateway.
2
Open a browser and enter the IP
address ”192.168.240.1”.
3
The login window will open up.
4
Enter password ”admin”.
5
Configure the Access Gateway.
