Steps:
1. Insert the top stem to bottom stem and locked
2. lock the protect part.
3. insert the front wheel into fork and disc brake pads
4. insert the quick release axle into the front hub
5. Make as hard as you can. Safety is the first thing .
Assemble the Bike: Pedals ,Set & Tire Pressure
1. Pedals
Note:
“L” and “R” (“L”=left & “R”=right ) is stamped on the threaded ends of the
pedals. The pedals have opposite thread directions and must go on a specific
side of the bike. Left and right side of the bike is determined by sitting on the
seat.
The
Left Pedal
has a reverse , non-standard thread and must be turned
counter clockwise to be screwed in.
The
Right Pedal
has a standard thread and must be turned clockwise to be
threaded in.
Apply some grease to the pedal threads before attaching. Install the Right
Pedal to the Chain Sprocket side of the bike and the Left Pedal to the opposite
side (same side as the battery key).
Start the pedal threads into the crank arm threads, by hand ,at least 4
complete 360°turn to ensure the pedals are not cross-treaded. Incorrect
installation of the pedals is not covered under warranty. Complete by securely
tightening with a 15mm wrench.
4
