SSP ROXCYC/TZ, User Manual, Page: 10 / 10

EDIT CUSTOM 01
CUSTOM 02
CUSTOM 03
CUSTOM 04
CUSTOM 05
CUSTOM 06
CUSTOM 07
CUSTOM 08
CUSTOM 09
CUSTOM 10
SCENE 01
SCENE 02
SCENE 03
SCENE 04
SCENE 05
SCENE 30
GREN 0~255
RED 0~255
BLUE 0~255
STRB 0~020
TIME 0~255
FADE 0~031
WHIT 0~255
AMBER 0~255
MENU
3.11 EDIT CUSTOM
3.10 FACTORY DEFAULT SETTING
2
3
4
5
7
8
9
DMX address = 001
ID ON/OFF = ON
COLOR = OFF
KEYLOCK = OFF
Parsonaliey = TOUR
Run mode = DMX
10 Fan = Auto
1 STATIC =000
ID address = 001
6
DIMMER = DIM4
EDIT = 000
11
EDIT CUSTOM
Enter the EDIT CUSTOM mode to edit the custom programs
to
Each custom program has 30 steps that can be edited.
Each step allows the creation of a scene using RED
RED , GREEN
GREEN , BLUE BLUE ,WHITE WHITE , AMBER AMBER ,
STROBE Stro. , TIME TIMER & FADE FADE .
CUSTOM 1
CUSTOM 10 .
9
8
3.9 SPECIAL SETTINGS
SETTINGS
UPLOAD PASSWORD
RESET PASSWORD
ID ONOFF
OFF
ON
****
SEND... END
****
RESET...
DIMMER
DIM1
OFF
DIM3
DIM2
DIM4
COLOR
RGB TO W
OFF
UC
MENU
SETTING
Enter ID in order to allow/disallow ID address function from the DMX512
controller.
Select UPLD to upload the custom programs from the current MASTER unit to
the SLAVE units.
In order to activate the upload function the password must be entered.
Password is the same as the main access password.
When uploading the MASTER and SLAVE units will display YELLOW.
If an error occurs when uploading the MASTER and/or SLAVE units will display RED.
On successful uploading of the custom programs the MASTER and SLAVE units
will display GREEN.
In order to reset custom modes to default values select REST .
Enter Dim to select dimmer mode and dimmer speed. When DIMMER is
set to Off , then RGBW and MASTER DIMMER are linear. The Dim 1/2/3/4
are speed modes of the non linear dimmer , Dim1 is the faster, while
Dim4 is the slowest.
The factory default setting is Dim4 .
COLOR is for activate/unactivate the color calibration functions.
When RGBW is selected, on RGB = 255,255,255, the color is displayed as
calibrated in CAL2 -- RGBW. When COLOR is set OFF , on RGB = 255,255,
255, the RGB values are not adjusted and the output is most powerful.
When [
UC ] is selected, the RGB output are adjusted to a standard preset universal color
which balances fixtures from different generations..
APPLY:(Type- )
APPLY:(Type- )
APPLY:(Type- )