OPERATION
Turning On/Off the unit
Press button to turn O
N
the unit. When the unit is O
N
. Press and hold it for 2 seconds to
turn Off the unit.
Sound and setting adjustment
Press and hold the
MENU
button to enter the Settings Menu:
BAL-FAD-EQ-LOUD-BEEP-CLOCK (12/24) -
P
_
VOL- AREA-DX-STEREO
In each Setting, press the
VOL+/-
buttons to adjust settings. In the menu setting press the
CLK
button to exit the Settings Menu.
EQ:
In the
EQ
Setting, press
VOL
button to select below preset mode
：
EQ1/EQ2/EQ3/EQ4/EQ
OFF.
LOUD:
In low volumes, set it on to reinforce the bass output. The sound will be enhanced
BEEP:
Select O
N/OFF
to set the system tone.
CLOCK (24/12):
In the
CLOCK
Setting, press the
VOL
button to set the time to 24H or 12H
format.
P-VOL (Preset VOL):
In
P-VOL
press the
VOL
button to set the default power on volume, If
the volume at shutdown is less than the P-VOL value, next time the unit is turned On, the
unit volume will be maintained as it was at shutdown. If the volume at shutdown is greater
than the P-VOL value. The next time the unit is turned on, the unit volume will default to the
P-VOL value.
AREA:
In the
AREA
Setting, press
VOL
button to choose USA or EUROPE frequency.
DX/LOC: DX:
In urban areas, most stations are strong enough and “LOCAL ON” mode
should be selected. Switch to DX mode to search for stations with weaker signals."
STEREO/MONO: STEREO:
Receives FM stereo signal.
MONO:
Change FM stereo to
monochrome, it can reduce the noise when the signal is weak.
Display the clock or information
Shortly press
CLK
button to show the clock or source information.
Clock setting
Press and hold
CLK
button for 2 seconds. “HH” will flash. Press
VOL+/-
button to change the
hour. After that press
CLK
button “MM” will flash. Press
VOL+/-
button to change the minute.
Then press
CLK
button to confirm.
Reset the unit
In AUX IN mode press and hold for 5 seconds to reset the unit. Reset the unit when:
a) Unit malfunctions or freezes.
b) Error symbol shows on the display.
Note:
If the
RESET function is activated, all the memory will be lost.
