INSTRUCTIONS
04
15
12. Number Button 6 /
In playback mode, press the button to adjust the angle of screen.
13. Dual (front and rear)USB
Warning :You can only use either front or rear USB at a time. never connect both front
and rear USB at the same time! This could cause malfunctions.
14. Dual (front and rear)AUX
Warning :You can only use either front or rear AUX at a time. never connect both front
and rear AUX at the same time!
15. IR
To receive infrared signal from the remote control.
16.
When there is a disc in the unit, press the button to eject the disc.
17. SD
Insert SD/MMC card, the unit will play the files automatically.
18. RESET
Press this button can back to default mode.
Step 1:
Press the mode button in the unit to switch to DVD mode.
Please follow the below instructions to calibrate when there is no touch or
touch is not accurate.
Step 2:
Insert a DVD disc, after DVD is loaded, press the stop button “ ” as show in
picture (1). in the remote short, the unit will display as show in picture (2).
Picture ( 1 )
Picture ( 2 )
Step 3:
Press “ ” in the remote as show in picture (3), the unit will display as show in
picture (4).
Picture ( 3 )
Picture ( 4 )
Step 4:
Press “ ” button in the remote and then quickly press “ ” button as show in
picture (5) and you will enter the touch calibration interface as show in picture (6).
Picture ( 5 )
Picture ( 6 )
Step 5:
Use the touch pen to touch top left corner, top right corner, down right corner,
down left corner, when the cross cursor stop at each corner, touch the center of the
cursor. Then the panel will display OK and leave the calibration interface and the unit
regained touch as show in picture (7).
Picture ( 7 )
Touch screen Calibration
Summary of Contents for SD724M
Page 1: ......