Ssl SD322B, User Manual, Page: 28 / 35

BASIC OPERATION
-26-
Important:
a. If the pairing can not be completed
within approximately 2 minutes ,
whiles the pairing mode is actived,
and you will need to reattempt
pairing (See steps 2-5 above) .
b. After pairing is completed, if the BT
ICON is stilling flash on the TFT ,
Once connecting is complete, you may
access the following function. Some of
the below mentioned functions only
accessible for handset supported with
hands-free profile.
2. Using The SSL
Answer a call
After you hear the ring tone (the incoming
telephone number will display on the
TFT LCD), press the “ ”button briefly on
the front panel to listen . (During talking,
if you want to use your phone to listen,
please press this button again .)
Make a call
Press and hold the “ ” button on the
front panel or remote control, the word
“DIAL NUMBER” will display on the TFT,
then you dial the number on the remote
control and then press briefly the “ ”
button . When you dials the wrong
number, press “ ” button to delete it.
Redial last number
When displaying BT phone interface,
press and hold the “ ” button(appro-
ximately 2 seconds) on the remote
control to dial out the last dialed phone
number.
please follow the steps to to reattempt
pairing through your handset until the
BT ICON remains solid on the screen.
1). Place SSL and mobile handset
in 3 meters apart.
2). Put SSL in pairing mode.
Press the POWER button to turn ON,
the BT ICON will flash on the TFT .
Press and hold the “PAIR/ ” button
until the word “
PAIRING NOW ” display,
it’s now ready for pairing.
(If you want not to pair, please press
it longer again.)
3). Set your BT phone to
“discover” SSL .
Following your phone’s instruction
guide for details, active your mobile
handset’s BT function, the handset
will search for accessible BT devices.
4). Your phone will find SSL .
Select SSL from the list.
5). Enter passkey “8888”, then press
“OK” to pair SSL and the handset,
the word “PAIR OK,
PLEASE CONNECT” will display in
the TFT .
6). Select the “CONNECT” from the
list on the phone,
if you connect successfully , the BT
ICON remains solid on the screen ,
then you can operate the function of
BT about the unit .
1. “PAIR” To Your BT Phone
Prior to using SSL for the fist time,
you must pair it with a BT-enabled mobile
handset.
The following steps describes pairing the
instruction for a typical BT enabled mobile
handset.
BT OPERATION