○Receiver Placing Direction
Placing RX-492 label outward.
Center of Chassis
○
Please refer below picture how to wire the cables.
!
!
○Receiver Placing
!
Top view of chassis
Place“TOP” indication upward.
Label
(RX-492)
Chassis
Please wire cables as much as lower.
Receiver top touch with body
Top view of chassis
Body(Cross-Section)
TOP
TOP
When mounting on the car chassis, please place receiver vertically as the below picture.
Any other methods might be affect to receiver performance.
○Receiver Placing
Mounting receiver on the chassis and place “TOP” indication upward.
Surface
Chassis
Surface
Center of Chassis
HOW TO WIRE CABLES WITH RECEIVER
When wiring cables of Electric Speed Controller, Motor, or Battery, please do not cover on receiver top.
It might be affect to receiver performance.
Motor, Battery cables
Servo, Electric Speed Controller Cables
Center of Chassis
HOW TO MOUNT TO 1/10 Scale EP CAR or below scales (Another Case)
Mounting RX-492 as below picture in case receiver cannot place “TOP” indicator upward due to body height.
In case of receiver top is over height, please place label upward as the below picture.
Surface
○Receiver Placing Direction
Placing “TOP” indication outward.
Center of Chassis
HOW TO USE CABLE COVER
If feeling declined radio wave or no signal even if placed correctly, please place receiver on cable cover.
Receiver sensibility would be greater by higher position.
○Receiver Placing
Placing RX-492 label outward.
Surface
Surface
○
Wired cables go through into cable cover. It would be easy to install cable cover with receiver as the below picture.
Motor
Electric Speed Controller
Battery
Receiving
area
Chassis
Chassis
Chassis
!
HOW TO MOUNT TO 1/10 Scale EP CAR or below scales
