OPERATION
20.
16. MUTE
17. EQ
18. USB PORT
19. AUX IN JACK
21. RESET
To reset all parameters to factory default values. Press the button to detach the control panel form
the head unit and remove the control panel,then use a subject with a sharp point end to thrush the RESET
hole.
flash on the LCD
o
detach
14.BAND
15.AMS
In radio mode,short press the BAND button repeatedly to select the one of the radio band : FM 1,
FM 2,FM 3, AM1,AM2 in a cycle sequence. When you select a band, the word F1
、
F2
、
F3 for FM band,
and A1
,
A2 for AM band will be shown on the LCD display.
control to scan each preset station in each band.
AMS button on the remote
Press the AMS
Press the EQ button to choose a desired preset equlizer mode: OFF, FLAT, POP, CLASS, ROCK.
check
During USB or SD playback, short press the AMS button to enter track search mode, then rotate
the VOL knob to select the number of your favorite track with high speed, then press the SEL button to
confirm and play the selected track. If no any operation in 5 seconds,it will play the current track.
When the 6 strongest stations will be stored into
In the USB or SD card mode:
Briefly press the or button to play the the next or previou track.
Press and hold the or button to fast forward or fast backward.
