RADIO OPERATION
Switch Between USA area and Europe area Frequency
VOL
Change Bands (BAND)
BAND
Manual Tuning ( / )
Auto Seek Tuning ( / )
STEREO/MONO
In radio mode, press the
button to enter the switch state of the US(USA) and EU(europe)
frequency, then rotate it to switch between US(USA) and EU(europe) frequency.
The system will change the frequency setting in about 3 seconds.
Press the
button to switch between the FM1, FM2, FM3, AM1 and AM2 bands.
Each band stores up to six preset stations.
Press and hold the or button on the front panel or on the remote control to enter manual
tuning mode. In manual tuning mode, press the or button to move the radio frequency
number up or down one step.
In standby mode or while not in manual tuning mode, quickly press the
or button to
move to the next/previous available station automatically.
or
.
FM station is received in stereo mode. However, if the signal
weak or reception is not as
good as you would like, switching to MONO mode usually improves the overall sound quality.
To Store / Recall Preset Stations
To memorize a station:
- To recall a preset station:
Automatic Store station/ Preset station scan (AMS)
AMS
AMS
LOCAL/DX
LOC
ST
The radio can be stored 6 preset stations for each band (FM1, FM2, FM3, AM1 and AM2) for a
total of 30 preset stations.
- Turn the radio on and select the desired band and station.
- Select a station by
button
- Press and hold the desired preset button (numbered 1-6 on the face of the radio) for more
than 2 seconds to save the station to that preset number.
- Select the desired band.
- Briefly press a preset button (numbered 1-6) to recall the corresponding preset station.
Press and hold the
button for more than 2 seconds to select six strong stations and store
them in the current band. The radio will automatically scan the current frequency and enter
the six strongest stations into the preset memory positions for that band.
Briefly press the
button on the remote control to recall each preset station that saved in
the memories in each band.
Press the
button on the remote control to choose local or distant reception mode.
is
Press the
button on the remote control to choose FM STEREO or MONO audio effect.
In urban areas, most stations are strong enough and “LOCAL ON” mode should be selected.
Switch to LOCAL OFF mode to search for stations with weaker signals.
7