Step 1:
Press the mode button in the unit to switch to DVD mode.
Please follow the below instructions to calibrate when there is no touch or
touch is not accurate.
Step 2:
Insert a DVD disc, after DVD is loaded, press the stop button “ ” as show in
picture (1). in the remote short, the unit will display as show in picture (2).
Picture ( 1 )
Picture ( 2 )
Step 3:
Press “ ” in the remote as show in picture (3), the unit will display as show in
picture (4).
Picture ( 3 )
Picture ( 4 )
Step 4:
Press “ ” button in the remote and then quickly press “ ” button as show in
picture (5) and you will enter the touch calibration interface as show in picture (6).
Picture ( 5 )
Picture ( 6 )
Step 5:
Use the touch pen to touch top left corner, top right corner, down right corner,
down left corner, when the cross cursor stop at each corner, touch the center of the
cursor. Then the panel will display OK and leave the calibration interface and the unit
regained touch as show in picture (7).
Picture ( 7 )
Touch screen Calibration
04
15
Remote
Control
Operation
REMOTE CONTROL FUNCTION
1. POWER Button
Press once to switch on, press again to
switch off.
2. MUTE Button
Press once to turn off audio output,
press again to resume volume level.
3. DSP Button
Press this button to show the time.
4.
Press this button to change mode.
5. EQ Button
Press this button to choose POP
、
ROCK
、
CLASSIC
、
EQ off.
6. SEEK+ ( ) / SEEK-( ) Button
In normal playback MP3
、
USB
、
SD songs,
Press this button to previous song or next
song.
7. VOL+ ( ) / VOL- ( )
Press this button to increase or decrease
volume level.
8. SELECT Button
Press this button to choose sound feature.
9. LOUD Button
Press this button to startup LOUD function.
10. BAND-P/N Button
In radio mode, press this button to choose
band.
In VCD
、
DVD mode, press this button to
choose PAL
、
AUTO or NTSC system.
11. LOC/RDM Button
In radio mode, press this button to switch
between local and direction.
In VCD
、
CD mode,press this key to randomly
play.
12. STOP Button
Press this button to stop playing.
13. PLAY/PAUSE Button
Press this button to switch between play and
pause.
In stop mode, press this button to play.
14. MO/ST-PROG Button
In radio mode, press this button to choose
stereo or mono station.
In audio mode, it can help STOP button to
programmed play.
SOURCE Button
POWER ON/OFF
MUTE
SOURCE
EQ
SEEK+/SEEK-
VOL+/VOL-
SELECT
LOUD
BAND-P/N
LOC/RDM
STOP
PLAY / PAUSE
MO/ST-PROG
UP/DOWN/L/R ENTER
AMS/RPT
TITLE
AUDIO
GO TO
SUB TITLE
PBC
SLOW
ANGLE
SETUP
OSD
ZOOM
MENU
DSP
28
0-10+
Summary of Contents for DD660
Page 1: ......
