SSD RTS, User Manual

Page: 23 / 65

RTS 2nd Generation SERVO AMPLIFIER
23
PVD 3487 GB 03/2004
3.2 Labelling
RTS SERVO AMPLIFIER IDENTIFICATION
Each RTS servo amplifier has an identification label affixed either on the metal plate at the rear for
wall-mounted versions or on the side of the heat sink for rack versions.
The information should be recorded and stored as with the information about the corresponding
servo motor. Remember to record the "A" and/or "B" label indications too.
SPECIMEN LABEL :
c
RTS code
d
Number of phases
e Input voltage (ac) f Input current (ac)
g Output voltage (dc) h Output current (dc)
The output voltage and current values correspond to those of the RTS model (as in RTS servo
amplifier performance chart).
A self-adhesive label is placed on the RTS front panel. Label "A" records :
- N ---- :. servo amplifier serial number
- R----- :. type of motor associated with RTS.
- DT-V : emf of tachometric dynamo for 1000 rpm.
- 10V ----TR : reference value corresponding to maximum motor speed in rpm
(factory set).
Where the RTS is fitted with an RZ 6602 customisation card , some of these indications are
recorded on the self-adhesive label on the customisation card (label "B") . This label also
states the model of RTS.
LABEL "A" LABEL "B"
RTS --V --A
R----- DT-V
10V ----TR
N----
R----- DT-V
10V ----TR