SSBC A163-1 Installation Instructions Manual Download Page 1

INSTALLATION INSTRUCTIONS

REAR DISC BRAKE CONVERSION KIT A163-1 

Chevrolet Cavalier & Pontiac Sunfire

______________________________________________________________________

Thank you for choosing STAINLESS STEEL BRAKES CORPORATION for your braking

needs. Pleases take the time to read and carefully follow these instructions to insure the ease of
your installation as well as the proper performance of the complete system.

Before beginning your installation, please verify you have received all the parts indicated on

the packing slip. If you believe anything to be missing or incorrect, please call our Customer Service
Department at 716-759-8666.

To assure your installation will go safely and smoothly, have the following items on hand to

assist you:

JACK & JACK STANDS

WRENCH SET

LUG WRENCH

MALLET

TORQUE WRENCH

TUBE WRENCHES

SOCKET SET

BRAKE FLUID

BRAKE CLEANER

Stainless Steel Brakes Corporation • 11470 Main Road • Clarence, NY  14031

Phone: (800) 448-7722 • (716) 759-8666 • Fax: (716) 759-8688

www.ssbrakes.com • [email protected]

Revision 3 3/28/12

These kits use the following pads:

SSBC#:

1047

FMSI#:

D-347

Summary of Contents for A163-1







Reviews: