SS-10 3G JOB AID
DOC. NO: SS-10 3G - 015 (REV. 01)
Page 5 of 9
2.
HARWARE INSTALLATION
2.1
IDENTIFYING THE CONNECTORS
The back of the SS-10 3G unit features the Supply, Voice and Serial
connectors:
Figure 1. Identifying the connectors
POWER:
Male connector, jack type, for the
power supply adapter.
SERIAL:
Female DB9 connector for the serial cable used for configuration.
LINE:
Analogue port (Trunk) connecting to analogue telephone or to
PABX trunk port.
2.2
CONNECTING THE CABLES
Connect the serial, phone and power cables as shown in the drawing below:
Figure 2 Connecting the cables
