5
Technical specifications
SSH PANEL
SSH SERIES
POWER
INTENSITY
SIZE
WEIGHT
MODEL
INDOOR
Wh
Amps
B X L X H Cm
kg
30-60 SR/2
PERSONAL
HEATING
0-160
0.7
54 x 32 x 3
2.9
4. Installation
SS Heat puts its technical department at your disposal to advise you about the optimal size and
location for your installation.
Electrical requirements
•
SS Heat plates must be plugged into a socket with sufficient capacity to power the plate.
Assembly instructions
1.
While the plate is unplugged from the mains, remove the frame by pressing on the edges of
the plate with your hands.
2.
Place the plate at the location where it will be installed. We recommend that you install it
horizontally in the lower part of the table back from the knees or above the knees. It may also
be installed vertically on the back of the table, centred in the available space.
3.
If the table is made of wood, drill the holes on the table always with a thickness lower than
that of the table, according to the graph. In case the table is made of metal or a material that
cannot be drilled, complete this step using an adhesive approved for the materials to be
glued and for temperatures of up to 80 ºC.
4.
Place the bracket screws in the table.
