www.srt.se
Status LEDs
GSM status
Blinking (
red
)
Searching for GSM
network
Blinking (
green
) slowly
GSM network found
Blinking (
green
) quickly
Call in progress.
No light
The device is either
turned off or in idle mode.
Charge level (PWR)
(charger disconnected)
Blinking three times
every 15 seconds
The device is turned on
and is signaling the battery
level with the three blinks:
green
green
green
Very good
green
green
red
Good
green
red
red
Low
red
red
red
Critical
Blinking interchanging
green
and
red
The device is turning off.
Charge level (PWR)
(charger connected)
Blinking every other
second (
green
)
The device is turned on
and charging.
Blinking every other
second (
red
)
The device is turned off
and charging.
Solid light (
green
)
The device is turned on
and fully charged.
Solid light (
red
)
The device is turned off
and fully charged.
Blinking interchanging
green
and
red
The device is turning off.
Charging
(Desktop charger)
Charging (USB)
Lift the rubber flap on
the side of the device
and insert the charger
cable into the mini usb
connector.
Place the unit in the desk-
top charger
Charging times
Before using your alarm
device the first time, or
whenever the battery is
fully discharged, it should
be charged for at least 4
hours. The device should
be charged every day.
MD status
No light
Man down function is
disabled.
Blinking (
yellow
)
Man down function is
enabled
TMR/RF status
No light
No contact with any RF
tags. Timer alarm is
disabled.
Blinking (
green
)
Device is in contact
with RF tag.
Blinking (
yellow
)
Timer alarm is enabled.
Blinking (
green
/
yellow
)
The device is in contact
with RF tag. Timer alarm
is enabled.
