( 5 / 18)
E-STOP:
This switch protects the operation of the base unit from undesired operation and its press turns the
Controller to an inactive state. E-STOP is a red color button. Once the E-STOP button has been
pressed, system is locked in an inactive position and the button must be rotated clockwise to be
released to continue operation.
GO:
This green button turns the selected channels of Hoist Control system ON when it is active. Once
the GO button has been depressed, the energizing of the hoists is turned off. GO button is blinking
when status of system is activated and you’re able to move hoist
DIRECTION SWITCHES:
They allow changing the direction of movement for each motor/hoist separately or in groups. The
LED located close to the switch indicates the direction of movement.
DIRECTION SWITCH LED
Green
UP
Red
DOWN
No light
stays in position
STATUS LED
GREEN
Device ready for action
RED
Indicates that the GO button is active
ORANGE
Indicates the activity of direction switch, LED blinks in movement
E-STOP LED
GREEN
E-STOP system OK
ORANGE
Indicates that the system needs to be reset
RED
E-STOP is active somewhere in the system
RED blinking
E-STOP button is pressed on the device
