6.7 Interval Start Preferences
In the interval settings, the start position for the
intervals can be changed:
• Man (Manual): Interval starts with the low level
after switching to interval screen. You have to
press
SET
to start the Interval.
• Auto (Auto): Interval starts with the high level
after switching to interval screen. You have to
press
SET
to stop the interval.
To edit the interval start press
SET
. With the
arrow buttons you can switch between Auto and
Man (Manual) and press
SET
again to set your
preference.
6.8 Enabling and Disabling External Control
The SmartIT brake can be controlled by external software via Bluetooth LE and ANT+.
In the default settings all three possible connections are enabled. In the case you do not need all
connection types and you have connection problems caused by other devices, you can disable
connections you do not want. If you don’t have problems with the connection it is highly recommended
to use the default settings and keep all connection types enabled.
To enable or disable a connection navigate to
External Control and press
SET
to enter the
setup. Navigate with the arrow buttons between
the connection types and press
SET
to disable
external control.
12
