SRM High Performance Ergometer, Short Manual

Page: 3 / 19

Short Manual SRM – Ergometer
3
1 General preparation
•
Power-on spiroergometry (30min before
beginning of test)
• Power-on ergometer’s power supply
• Preparation diagnostic devices (Lactate
analysis, etc.) 30min beginning of test
• Room temperature (18 – 24°C) should
measured
• Relative air humidity should measure (30 –
60%) in room
• Check position of ventilator
2 Settings USB/Serial Converter
 The installation of the of USB/Serial Converter
is mandatory for the data recording
 Check the activation of the USB/Serial
Converter at the Active port ("SRM
Downloadcable USB")
We recommend the use of the following
USB/Serial Converter:
 ATEN USB-to-Serial-(RS 232)Converter,
(Model: UC-232A), (Windows 7)

Plugable USB to RS-232 D89 Serial Adatper,
(Windows 8)