SR
SYSTEM-ELEKTRONIK GmbH
|
Eschachstr. 23
|
D-78078 Niedereschach
|
phone +49 77289268-0
|
Seite | 4
Electrostatic sensitive modulesl
Electronic components can be damaged or destroyed by electrostatic
discharges. This does not necessarily lead to a failure of the module, it can
also result in malfunctions! The following instructions must therefore be
observed:
•
Before working on the open unit, any charge on the body must be discharged by
touching the grounded housing parts.
•
The same applies, of course, to any (protective-insulated) tools to be used. This
must also be discharged on a grounded object.
•
If you remove or add modules from the system, the device must always be switched
off or disconnected from the supply voltage.
•
You should always touch modules only at the edge. Touching the conductor tracks
and connection pins must be avoided at all costs.
