Copyright By SRC
Design and Specification are subjected to change
Page 5
Step 4:
Orient the Body of the Crash Bar (1),
its mounting holes aligned in-line with
the Windshield brackets (from both
sides) and slide-in the Washer M6 (5)
and Screw M6 x 10 (7) – 2 off from
either side.
Secure the threads on the mounting
holes of the Inner bracket.
The GPS Bar (2), can be mounted to
the Body of the GPS Bar, using the
Adaptor (3) – 2 off (1 from each side),
M8 Washer (4) and Screw M8 x 20 (6).
Mounting of the GPS Bar to the Body
of the GPS Bar, can be done off-line
too.
Step 5:
Tighten the Screws fully to the torque,
as specified in the BOM table
