Copyright By SRC
Design and Specification are subjected to change
Page 4
Step 5:
Ensure Orientation, Mounting Symmetry of the
Head Light Guard from the front side and
tighten the fasteners to torque as specified in
the BOM table
The Head Light Guard “As is final Mounted
Condition”
Step 3:
Orient the Head Light Guard, as shown,
to the Bracket (LH) and slip-in the
Grommet (2) – 2 off, as shown.
The groove in the Grommet will closely
hug the outer surfaces of the Head Light
Guard and holding on to the Mounting
Pin.
Step 4:
Repeat the Step 3 for mounting the Head
Light Guard on the Right hand side.
