48
Damper Installation
RCT R:
Install the cable stop collar with the housing guide in the 6
o'clock forward position, angled ≈20° degrees from center.
Push the low speed adjuster knob spring retainer (A) in and push the
knob out of the remote spool.
Remove the top cap seal.
Clean each part.
Install the remote spool onto the hex adjuster with the spool cable set
screw oriented within the 87° range zone.
Install the knob seal.
Install the low speed adjuster knob onto the hex adjuster. Install and
tighten the knob retaining screw.
3b
RCT R
87°
20°
A
2 mm
1.2 N·m (10 in-lb)