15
Piston Assembly Installation
Place the SwingLink™ onto the SRAM Guide Lever Internals
Assembly Tool to adjust the length of the push rod on the
SwingLink.
Use a 2 mm hex wrench to tighten the push rod into the
SwingLink.
Use a 2 mm hex wrench to remove the SwingLink from the SRAM
Guide Lever Internals Assembly Tool and place the pushrod into
the coupler sleeve.
7
SRAM Guide Lever Internals Assembly Tool
15 N•m (133 in-lb)
22 mm
8
SRAM Guide Lever Internals Assembly Tool
2 mm hex wrench
22 mm
9
SRAM Guide Lever Internals Assembly Tool
2 mm hex wrench
22 mm
SRAM Guide Lever Internals Assembly Tool
2 mm hex wrench
22 mm
